The Geissele Reaction Rod is a tool that securely holds an upper receiver assembly for maintenance and assembly work. It will make working on an AR15 or M4 carbine a dream. The removal and installation of barrels, flash hiders, gas blocks, and handguards are made much easier and simpler. The Reaction Rod is designed to be gripped in a bench vise so that the rod is either horizontal or vertical. The upper receiver is then slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning. This allows all the torque from barrel nut wrenches to go directly into the barrel extension. In contrast, receiver vise blocks transmit the turning force into the aluminum receiver, a good part of which passes through the small, easily distorted receiver index pin. With the Geissele Reaction Rod, the marring of an upper receiver’s finish by gripping and twisting inside vise blocks is eliminated and so is the need to remove sights and mounts from the receiver’s M1913 rail.
The Geissele Reaction Rod is machined at Geissele Automatics’ state of the art manufacturing facility in Norristown, Pennsylvania. The rod is cut from a solid bar of 4140 Chrome Moly steel, properly quenched/tempered and ground to an exact diameter that is smooth and straight so the rod will enter an upper receiver without wobble.
*The Geissele 556/223 CaliberReaction Rod is compatible with the HK MR556 upper receiver.