1 Aimpoint Micro T-2 2 MOA - No Mount
1 American Defense Medium Modular Base OR Mini ACOG Mount
1 American Defense B2 Risor for Aimpoint Micro T1 - 1/3 Co-Witness
Aimpoint Micro T-2 2 MOA
Inside the completely new sight housing are advanced optical lenses that takes optical performance to a new level. Cutting edge lens coatings radically improve the shape and clarity of the 2 MOA red dot – especially when used with an accessory magnifier. The Aimpoint Micro T-2 is ideal as a standalone sight, and thanks to its small size, it can also be piggybacked on top of larger magnifying scopes, night vision, or thermal imaging optics.
The Micro T-2 can also be used by hunters and sport shooters who need night vision compatibility. The performance of the Micro T-2 is optimized for use with all generations of night vision devices NVDs, but is ideal for 3rd generation Night Vision Technology.
Aimpoint’s unique coating on the front lens reflects the dot’s selected frequency of red light at near 100% efficiency to give the highest possible dot brightness with the least amount of energy while other wavelengths in the visible and near-infrared part of the spectrum pass with a minimum of reduction. This provides the clearest, brightest image possible when used with a 3rd generation Night Vision Device NVD but alos when used with Aimpoint 3XMag magnifyer.
With 4 NVD-compatible brightness settings and 8 daylight settings including one extra-bright setting, the Micro T-2 is ready for round the clock use.
Unique features of the Aimpoint Micro T-2:
- Advanced optical lenses for even better light transmission
- Front Flip-up lens cover is included
- Transparent rear Flip-up lens cover is included
- Reinforced protection of the turrets for even greater ruggedness
- Ideal for rifles, carbines, shotguns, submachine guns, and handguns
- Weight 3.7 oz. 105g including mount, sight only 3.0 oz. 84g
- 1X non-magnifying parallax free optic
- Compatible will all generations of Night Vision Devices NVD
- 1 Off position, 4 night vision compatible settings and 8 daylight settings – one extra bright for use with laser protection glasses or in bright desert sunlight
- Integral Picatinny-style base allows easy attachment to any rail
- ACET technology allows 50,000 hours over 5 years of constant operation with one battery
- Available in 2 MOA dot size
- Hard anodized non-reflective finish
- Submersible to 80 feet 25 meters
- Use as a standalone sight or piggybacked on larger magnifying, thermal, or night vision optics
Standard features for all Aimpoint® sights:
- Unlimited field of view
- Parallax-free and unlimited eye relief
- Unaffected by extreme weather conditions
- Rugged, durable construction
- No hazardous materials
- No laser emission that could be harmful to your eyes
- Mechanical switch for speed and reliability
- Increased aiming confidence
- Article number 200170
- Technology ACET Advanced Circuit Efficiency Technology
- Working principle Reflex collimator sight - red dot sight
- Lightsource LED Light Emitting Diode totally eye-safe
- Red dot size in MOA minute of angle* 2
- Parallax Absence of parallax - No centering required
- Eye relief Unlimited
- Night vision compatibility Yes
- Anti-reflex coating all surfaces & multi-layer coating objective lens
- Battery One 3V Lithium battery, type CR2032
- Battery life in hours ** 50 000 over 5 years of continuous use
- Battery life in hours **at NVD settings *** 500 000
- Dot intensity adjustment Manual rotary switch
- Daylight DL settings 1 Off & 8 DL of which one extra bright
- NVD settings 4 NVD
- Material housing Extruded high strength aluminum
- Surface finish Hard anodized, semi-matte
- Adjustment 1 click 13mm at 100m, 1/2” at 100yds
- Mounting methods Integrated Picatinny/Weaver
- Temperature range -45° - +71° C, 50°- +160° F
- Water resistance - submersible to 25m, 80ft.
- Radioactive components used None
* 1 MOA ˜ 30 mm at 100 meters ˜ 1” at 100 yards.
** at room temperature & at setting 8 out of 12.
*** Night Vision Device.
American Defense Medium Modular Base
The AD-B2 modular base is the medium base in our modular lineup. It is designed to accept several different risers to accommodate a variety of optics. Standalone, it is ideal for the 1.5−3x Power Mini ACOG Scopes, such as the TA33 and TA44. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
American Defense B2 Risor 1/3 Co-WitnessSOCOM Height
The B2-T1SOCOM Riser is designed to interface with the B2 modular base and is configured for the Aimpoint Micro T-1. It will put the iron sights in the lower one third of the optic. This spacer also fits the Vortex SPARC and Primary Arms Micro Dot will not Co-Witness. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize.